Shisato Axis Slim
|
- Japanese S-3 Cobalted steel
- Premium hand-forged Japanese shear
- Well-balanced scissor with very thin blades and narrow tips – extremely light weight
- Cuts like silk and is light as a feather
- "Flat" adjustable dial spring-leaf tension system doesn’t "get in the way"
- Convex edge and hollow-ground blades
- Shear available in 5”, 5.5”, 6”
- Also available in the popular 6.5" size $354.00
|
| |
Shisato Echo Ergonomic Handle
|
- Ergonomic shear for the stylist who is havingproblems with carpal tunnel, tendonitis, shoulder or back pains
- Extremely bent down thumb ring that allows the stylist to lower the elbow and shoulder dramatically
- For those who probably need a "swivel" thumb shear, but cannot use one
- Hand-forged Japanese shear with adjustable dial spring-leaf tension system
- Convex edge and Hollow-ground blades
- Natural handle configuration, great spacing between the thumb and finger rings to prevent crampingwhen closing the shear
- Japanese S-3 cobalted steel
- Light-weight design, thin blades and narrow points for wonderful detail work.
- Available in 5”, 5.5”, 6”, 6.5”
|
| |
Shisato Echo 35 Tooth Ergonomic Thinning Shear
|
- Japanese S-3 Cobalted steel
- Hand-forged Japanese 35 teeth thinner
- Ergonomic thinner is perfect for the stylist who is having problems with carpal tunnel, tendonitis, shoulder or back pain.
- Natural handle configuration and great spacing between the thumb and finger rings to prevent cramping when closing the shear
- Extremely bent down thumb ring that allows the stylist to lower the elbow and shoulderdramatically when using the shear
- For those who probably need a "swivel" thumb shear, but cannot use one.
- Lightweight design and thin blades
- Convex edge and hollow-ground blades
- Adjustable-dial spring-leaf tension system
|
| |
Shisato Karma Dry Cutting Shear
|
- Lightweight Japanese Hitachi ATS 314 Cobalted steel
- Hand-forged from a new advanced alloy Japanese Hitachi steel category (ATS 314 - Molybdenum Vanadium Cobalt) that produces one of the finest cutting blades available on the market
- Designed for dry cutting
- Design has been widely used in Japan by top stylistswho recognize the benefits of using tools made for specific tasks
- Width of the blade allows it to be sharpened to an extreme 35 degree angle that allows the shear toglide through the dry hair
- Convex edge and hollow-ground blades
- Superior pivot system
- Permanent finger-rest
- Available in 5.5”, 6”
|
| |
Shisato Lotus Texture/Thinning Shear
|
- Japanese V-10 (Gold) stainless steel
- Highest quality Japanese hand-forged shear
- Varied teeth design to give the designer a unique styling tool for those newer styles
- Features 20 small teeth and 6 larger teeth
- Particularly suited for dry cutting
- Adjustable tension system
- Convex edge and hollow-ground blades
|
| |
Shisato Infinity Shear
|
- High quality Japanese hand-forged shear
- Japanese 440-C stainless steel
- Extremely comfortable off-set handle
- Narrow blades and thin points for excellent detail work
- Convex edge and hollow ground blades
- Shear available in 5”, 5.5”, 6”, 6.5”
|
| |
Shisato Elan Shear
|
- Japanese V-10 super cobalted stainless steel
- Premium quality hand-forged Japanese shear
- "Opal" flat-screw tension system
- Convex edge and hollow-ground blades
- Combines superior cutting with a comfortable crane handle design and permanent finger rest
- Angled permanent finger rest allows for greater cutting leverage with less hand pressure
- Scissor available in 5.5” and 6”
|
| |
Shisato Orion Ergonomic Shear
|
- Japanese S-3 Cobalted stainless steel
- Premium hand-forged Japanese shear
- Ergonomic design – crane handle design for completely natural hand position, maximum spacing between the thumb and finger rings toprevent cramping when closing the shear
- 360 degree swiveling thumb allows the stylist to use all cutting techniques and positions with theminimum strain on the hand, elbow, shoulder and back
- For anyone suffering from carpal tunnel, tendonitis or any shoulder or back problems
- Swivel thumb can be "locked" into position if desired
- Convex edge and hollow-ground blades
- Adjustable dial with leaf-spring tension system
- Available in 5”, 5.5”, 6”, 6.5”
- Also available in a 15 teeth texturizer / 35 teeth thinner-blende
|
| |
Shisato Orion Ergonomic Swivel 15 Tooth Texturizer
|
- Japanese S-3 Cobalted stainless steel
- Premium hand-forged Japanese thinner-blender
- Ergonomic design – crane handle design for completely natural hand position, maximum spacing between the thumb and finger rings toprevent cramping when closing the thinner
- 360 degree swiveling thumb allows the stylist to use all cutting techniques and positions with theminimum strain on the hand, elbow, shoulder and back
- For anyone suffering from carpal tunnel, tendonitis or any shoulder or back problems
- Swivel thumb can be "locked" into position if desired
- Convex edge and hollow-ground blades
- Adjustable dial with leaf-spring tension system
- 6" blade with 15 teeth or 35 teeth (wave-cut for smoother cutting)
- Also available in a cutting shear
|
| |
Shisato Prism 7 Tooth Chuncker
|
- Japanese 440-C stainless steel
- High quality hand-forged Japanese texturizer
- Off-set "chunking" and texturizing shears with agreat edge for smooth "razor" cutting
- Convex edge and hollow-ground blades
- Shear has 5.5" blade with 7 teeth
|
| |
Shisato Ultra Shear
|
- Japanese Hitachi ATS 314 Cobalted stainless steel
- Premium hand-forged Japanese shear
- High quality shear, excellent cutting edge
- Thin blades and narrow tips for precision detail work
- Sealed ball-bearing with a leaf-spring tension system ensures effortless cutting
- Convex edge and hollow-ground blades
- Superior pivot system
- Permanent finger-rest
- Shear available in 5”, 5.5”, 6”
|
| |
Shisato Regency Ergonomic Swivel Shear
|
- Hand-forged Japanese shear
- Japanese V-10 (Gold) Super Cobalted stainless steel
- Highest quality Japanese steel and workmanship
- Ergonomically-correct handle design and swivel thumb produce one of the finest cutting rotating-thumb scissors available
- 360 degree thumb rotation with ball-bearing screw system
- "K-blade" design insures the smoothest dry or wet cutting possible
- A truly superb shear in both design and function
- "Opal" flat-screw tension system
- Convex edge and hollow-ground blades
- Available in 5.5”, 6”
|
| |
.jpg)
